Airflow Type Spin Flash Dryer Flash Evaporation Dryer for Ammonium Bifluoride

• After-sales Service: After Sell Service
• Warranty: 12 Months
• Type: Flash Drying Equipment
• Model NO.: XSG
• Application: Block
• Fuel: Gas
• Operating Pressure: Atmospheric
• Roller Number: Multi-Drum
• Cloth Membrane Forms: Splash
• Fluid Bed Drying Equipment Type: Multilayer Fluid Bed
• Vacuum Drying Equipment Type: Continuous Vacuum
• Condition: New
• Evaporated Water Volume: 2000 Kg/H
• Equipped Power: 11kw
• Area: 30 Square Meter
• Height: 5 M
• Barrel Diameter: 1.0 M
• Transport Package: Wooden Container
• Specification: 5m in Height
• Trademark: JXX
• Origin: China
• HS Code: 842119
• Production Capacity: 15sets/Month

Product Description

Company introduction: Jiangsu Xingxing Drying Equipment Co., Ltd
Jiangsu Xingxing Drying Equipment Co.,Ltd has established in 1998 and it covers an area of 15000 square meters, possesses fixed asset of USD 7 million. The products have exported to US, Singapore, India, Ukraine, Russia, Korea and so on. The company have advanced production equipment , excellent technical team and after-sales service.

WORKING PRINCIPLE
The hot air enters into the bottom of the dryer in tangent direction. Under the driving of the stirrer, a powerful rotating wind field is formed. Paste materials go into the dryer via screw feeder, and dispersed by impact, friction and shearing force under the powerful high-speed rotating impeller; bulk materials immediately get smashed, in fully contact with hot air in order to get heated and dried. Then the dehydrated materials rise with hot air. A hierarchical ring will make large particles retentate, while exhaust small particles out of dryer from center of the ring, recovered by cyclone separator and deduster. The bulk materials or materials without being fully dryer will be thrown to the wall under centrifugal force and drop to the bottom again to be smashed and dried. 


FEATURES
(1) Dynamic integration of cyclone, fluidized, spouted and grinding classification technologies.  
(2)  Equipments are compact and small-sized, enabling high efficiency and continuous production, achieving "small equipment, large-scale production".
(3) Great drying intensity, low energy consumption, high thermal efficiency.
(4) Short material residence time, good product quality, available for drying heat sensitive materials.
(5)Negative or slightly negative pressure operation, good impermeability, high efficiency, eliminating environmental pollution.

APPLICABLE MATERIALS
Organic compounds: atrazine (pesticides), cadmium laurate, benzoic acid, germicide, sodium oxalate, cellulose acetate, the organic pigments, and so on;
Dye: santhraquinone, black iron oxide, indigo pigments, butyric acid, titanium hydroxide, zinc sulfide, various azo intermediate;
Inorganic: borax, calcium carbonate, hydroxide, copper sulfate, ferric oxide, barium carbonate, antimony trioxide, all kinds of metallic hydroxide, all kinds of heavy metal salt, synthetic cryolite and so on;
Food: soy protein, gelatinized starch, distillers' grains, triticin, wheat starch and so on.

Technical Parameter

Model	XSG-2	XSG-4	XSG-6	XSG-8	XSG-10	XSG-12	XSG-16	XSG-20
ID of main machine,mm	200	400	600	800	1000	1200	1600	2000
Air amount,M3/h	350-500	1150-2000	2450-4500	4450-7550	7000-12500	10000-20000	18000-36000	28200-56500
Evaporated moisture,kg/h	12-17	40-70	80-150	150-250	230-4250	300-600	600-1000	1000-1500
Max equipped capacity,kw	10	20	40	65	85	105	150	230
Max,hight,m	4.0	4.8	5.8	6.5	7.1	7.8	8.8	10.1
Occupied area,m2	15	20	28	35	40	52	80	150

Note:
1 the evaporated amount of moistureis calculated when the temperature of inlet is 180 degrees and the temperature of outlet is180 degree.
2.Besides the models above mentioned,special specification can also be made as request;
3.the equipped capacity above mentioned is standard.the power can also be decreased in accordance with pracitcal condition.
Raw materials to treated and characteristics(based on Model 6)

Name of raw material	Zinc stearate	Aluminum hydroxide	Zinc carbonate	Insecticide	TMTD	DSD acid	Ferric Oxide red	Antimony Dioxide	Cuprous Chloride	White Carbon Black
T of air inlet,oC	150	180	150	120	140	150	200	180	200	280
Primary moisture,%	80	55	80	30	65	60	60	45	30	85
Final moisture,%	0.5	1.5	1.0	1.0	0.5	0.5	0.5	1.0	3.0	5.0
Practical dry capacity,kg/h	140-160	250-280	130-170	80-110	80-120	80-120	300-350	280-320	290-310	250-300

Name of raw material	ZDC Accelerant ZDC	Oil Soluble ink	Substitute Zinc Manganate	Phthaloc- Yanin dye	Calcium Citrate	Superfine Calcium Carbonate	Slurry Treatment Agent	Sodium Isocyanurate Dioxide	Sodium Isocyanurate Trioxide
T of air inlet,oC	150	150	120	150	140	160	200	180	150
Primary moisture,%	60	45	30	55	40	70	75	25	30
Final moisture,%	0.5	2.0	1.0	1.0	1.0	1.5	5.0	0.2-2	1.0
Practical dry capacity,kg/h	80-110	350-380	120-150	160-180	300-350	430-470	290-310	80-120	90-150

Company Show
Company introduction: Jiangsu Xingxing Drying Equipment Co., Ltd.
Jiangsu Xingxing Drying Equipment Co.,Ltd has established in 1998 and it covers an area of 15000 square meters, possesses fixed asset of USD 7 million. The products have exported to US, Singapore, India, Ukraine, Russia, Korea and so on. The company have advanced production equipment , excellent technical team and after-sales service.

CERTIFICATE


Package:wooden case

Service:
pre-sale service
We Invite customers to visit our company and communicate on technical requirements face to face.
sale service
Responsible for debugging the equipment according to customers' requirements of various technical data. Our engineers will train our customers about equipment features and operation key points to make sure the equipment running in the best condition.
after-sale service
We provide installation, debugging, maintenance, training and other services; Provide relevant technical data, equipment, software and related GMP certification materials;Set up after-sales service hotline, and arrange personnel to visit customers every year to know more customer needs,like customer operation problems in the process of production equipment.
quality promise
Our company promises strictly operate the ISO9001 quality system certification standards and pharmaceutical equipment GMP audit requirements,promise we provide new equipment. Advanced technology,good quality.Equipment operation safe reliable, affordable, easy to maintain.
Equipment warranty period is one year,all the parts for the equipment choose well-known brand.During the warranty when equipment have problem in quality like equipment failure and damage,the company for free maintenance or replacement.

We look forward to cooperating with partners from all over the world to build win-win cooperation relationship in long term. Welcome for your visiting.

Previous Exhibition

FAQ:
1. Q: Please describe your warranty period.
    A: 15 months after the equipment is arrived at the destination port or 12 months after  the installation and commissioning of the equipment, whichever comes first.

2. Q: Do you provide on-site installation and commissioning?
    A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.

3. Q: How about the cost of on-site installation and commissioning guidance?
    A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.

4. Q: Are you a factory or a trading company?
    A: We are a professional manufacturer. We have own factory and pilot plant for customers to do sample testing.