Mvr Concentration Evaporator, Pharmaceutical Mechanical Vapor Recompression Evaporator

• After-sales Service: After Sell Service
• Warranty: 12 Months
• Certification: CE, ISO
• Application: Heater, Cooler, Vaporizer, Condenser
• Principle: Recuperative Heat Exchanger
• Style: Steel Type
• Model NO.: MVR
• Material: Stainless Steel
• Control: PLC
• Transport Package: Wooden Case Package
• Specification: 7000*5000*6000mm
• Trademark: JXX
• Origin: China
• HS Code: 8419899090
• Production Capacity: 10 Sets/Months

Product Description

MVR overview
MVR is the abbreviated form of the mechanical vapor re-compression.This is a technology that recovers the energy of the secondary vapor it generates and therefore reduces the demand for external energy.As early as in 1960s,this technology applied successfully to chemical,pharmaceutical,paper-making,waste-water treatment and desalination fields.
MVR technical principle
When mechanical vapor is re-compressed,the mechanically driven compressor will compress the secondary vapor generated by the evaporator to form a higher pressure.In this sense,the compressor acts as a heat pump to increase energy to the vapor.In another word,in this process,the low-temperature vapor is compressed by the compressor to improve its temperature and pressure and increase its enthalpy and then flow into the heat ex-changer for heat exchange and condensation so as to make use of the latent heat of the secondary vapor.Except machine start-up,no generation of additional vapor is required during the entire evaporation process.
Technical characteristics
 1,Low energy consumption,low operation cost
 2,Small space occupation
 3,Require fewer public utilities and less total investment
 4,Stable operation and high degree of automation
 5,Require no primary steam
 6,Short retention time due to frequently used single effect
 7,Simple process,high practicability,and excellent service performance at some loads
 8,Low operation costs
 9,Capable of evaporating at  and below 40celsius without any refrigerating plant and therefore particularly suitable for heat sensitive materials.
Design and function
Vapor compressor currently used for MVP technology has two forms:the positive displacement type and the centrifugal type
 
Among positive displacement compressors,the most commonly used compressor is the Roots compressor which compresses gas by bringing two or three lobed rotors to relative motions in the cylinder.This kind of compressor keeps two rotors engaged with each other by relying on synchronic mesh gears located on the rotor axle ends;the curved surface of each concave on the rotor,together with the inside wall of the cylinder,forms a working displacement,which carries away the gas from the gas suction port during rotor rotation,when the carried gas moves to the vicinity of the exhaust port,the pressure in the working displacement will abruptly pick up at the moment,It is to connect with the exhaust port due to the return of gas at higher pressure,and the gas then is delivered to the exhaust passage.This compressor has a large pressure ratio and a small sucking rate.
  
Centrifugal compressors provide gas energy by means of high-speed rotation of impeller blades.In these compressors,the gas is accelerated and then passes through the diffuser at downstream of the impeller to decelerate.In doing so,the kinetic energy is transformed into pressure energy.According to the direction of fluids passing through the impeller ,these compressors are named axial flow,mixed flow,or centrifugal compressors respectively.They are renowned for large pressure ratio,big flow rate,and good stability.
  
Whichever is the most suitable compressor depends on specific operating conditions and the economy of the entire system.Critical parameter s include the pressure rise to be achieved and volume flow of steam to be compressed.

Company Show
Company introduction: Jiangsu Xingxing Drying Equipment Co., Ltd.
Jiangsu Xingxing Drying Equipment Co.,Ltd has established in 1998 and it covers an area of 15000 square meters, possesses fixed asset of USD 7 million. The products have exported to US, Singapore, India, Ukraine, Russia, Korea and so on. The company have advanced production equipment , excellent technical team and after-sales service.

CERTIFICATE


Package:wooden case

Service:
pre-sale service
We Invite customers to visit our company and communicate on technical requirements face to face.
sale service
Responsible for debugging the equipment according to customers' requirements of various technical data. Our engineers will train our customers about equipment features and operation key points to make sure the equipment running in the best condition.
after-sale service
We provide installation, debugging, maintenance, training and other services; Provide relevant technical data, equipment, software and related GMP certification materials;Set up after-sales service hotline, and arrange personnel to visit customers every year to know more customer needs,like customer operation problems in the process of production equipment.
quality promise
Our company promises strictly operate the ISO9001 quality system certification standards and pharmaceutical equipment GMP audit requirements,promise we provide new equipment. Advanced technology,good quality.Equipment operation safe reliable, affordable, easy to maintain.
Equipment warranty period is one year,all the parts for the equipment choose well-known brand.During the warranty when equipment have problem in quality like equipment failure and damage,the company for free maintenance or replacement.

We look forward to cooperating with partners from all over the world to build win-win cooperation relationship in long term. Welcome for your visiting.

Previous Exhibition

FAQ:
1. Q: Please describe your warranty period.
    A: 15 months after the equipment is arrived at the destination port or 12 months after   the installation and commissioning of the equipment, whichever comes first.

2. Q: Do you provide on-site installation and commissioning?
    A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.

3. Q: How about the cost of on-site installation and commissioning guidance?
    A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.

4. Q: Are you a factory or a trading company?
    A: We are a professional manufacturer. We have own factory and pilot plant for customers to do sample testing.